Learn
From the basics to designing the exact grip you want — with videos and step guides.
Members onlyTraining content rolls out to subscribers. Please hold tight until launch.
Curriculum
LESSON 01 · approx 6 min
A tour of the screen
What you'll be able to do
- The tabs at the top are your workflow in order
- The figure stays visible while you adjust numbers on the right
- Weight, length and max diameter update instantly
🔒 Videos are members-only
LESSON 02 · approx 8 min
Shaping the outline
What you'll be able to do
- Start from a preset (straight / torpedo / bomb)
- Add anchors to build thickness and waists
- Round corners with fillets
🔒 Videos are members-only
LESSON 03 · approx 10 min
Creating grooves
What you'll be able to do
- Choose ring, shark or spiral sections
- Sections come from tools — true to real machining
- Save as my-groove templates
🔒 Videos are members-only
LESSON 04 · approx 8 min
Placing grooves
What you'll be able to do
- Set position, count and pitch by drag or number
- Interference between grooves warns you
- Thin walls turn red on the spot
🔒 Videos are members-only
LESSON 05 · approx 12 min
Dots, axial grooves, polygons
What you'll be able to do
- Place dots and axial grooves (ball/V tools, swept bottoms)
- Build proper grips with standing polygon corners
- Stagger multiples with a start angle
🔒 Videos are members-only
LESSON 06 · approx 6 min
Coloring and engraving
What you'll be able to do
- Preview plain, PVD or hand-painted
- Engrave text on open flats
🔒 Videos are members-only
LESSON 07 · approx 7 min
Checking in 3D
What you'll be able to do
- Spin the actually-cut solid
- Verify wall thickness and CoG in section
🔒 Videos are members-only
LESSON 08 · approx 9 min
Getting the order drawing
What you'll be able to do
- Dimensions, toolpath coordinates and sections to PDF
- Read the tool table and setup sheet
- Trace codes prevent order disputes
🔒 Videos are members-only