Lernen
Von den Grundlagen bis zum gezielten Griff – mit Videos und Schritt-Anleitungen.
Nur für MitgliederTrainingsinhalte erscheinen nach und nach für Abonnenten. Bitte etwas Geduld bis zum Start.
Lehrplan
LESSON 01 · ca. 6 Min.
A tour of the screen
Das wirst du können
- The tabs at the top are your workflow in order
- The figure stays visible while you adjust numbers on the right
- Weight, length and max diameter update instantly
🔒 Videos nur für Mitglieder
LESSON 02 · ca. 8 Min.
Shaping the outline
Das wirst du können
- Start from a preset (straight / torpedo / bomb)
- Add anchors to build thickness and waists
- Round corners with fillets
🔒 Videos nur für Mitglieder
LESSON 03 · ca. 10 Min.
Creating grooves
Das wirst du können
- Choose ring, shark or spiral sections
- Sections come from tools — true to real machining
- Save as my-groove templates
🔒 Videos nur für Mitglieder
LESSON 04 · ca. 8 Min.
Placing grooves
Das wirst du können
- Set position, count and pitch by drag or number
- Interference between grooves warns you
- Thin walls turn red on the spot
🔒 Videos nur für Mitglieder
LESSON 05 · ca. 12 Min.
Dots, axial grooves, polygons
Das wirst du können
- Place dots and axial grooves (ball/V tools, swept bottoms)
- Build proper grips with standing polygon corners
- Stagger multiples with a start angle
🔒 Videos nur für Mitglieder
LESSON 06 · ca. 6 Min.
Coloring and engraving
Das wirst du können
- Preview plain, PVD or hand-painted
- Engrave text on open flats
🔒 Videos nur für Mitglieder
LESSON 07 · ca. 7 Min.
Checking in 3D
Das wirst du können
- Spin the actually-cut solid
- Verify wall thickness and CoG in section
🔒 Videos nur für Mitglieder
LESSON 08 · ca. 9 Min.
Getting the order drawing
Das wirst du können
- Dimensions, toolpath coordinates and sections to PDF
- Read the tool table and setup sheet
- Trace codes prevent order disputes
🔒 Videos nur für Mitglieder